hydraulic planetary drive

Single and double reduction planetary equipment drives to be used with electric, hydraulic, surroundings motors or mechanical power input from high swiftness, low torque sources to deliver decreased speeds at increased torques. The input side has regular SAE pads for engine mounting. Available in the three output configurations demonstrated below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with Plastic Gear Rack integral parking input rate is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is usually standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring equipment to minimize backlash growth caused by wear. The exterior bearing nut supplies the best in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.